Autoplay
Autocomplete
Previous Lesson
Complete and Continue
ASPHALT TECHNOLOGY
1.0 INTRODUCTION TO THE COURSE
1.1 Welcome Remarks (29:58)
1.2 Introduction to Asphalt Paving Materials (55:24)
2.0 SAMPLING AND QUALITY TEST ON ASPHALT PAVING MATERIALS
2.1 Quality Tests on Asphalt Cement (56:21)
2.2 Quality Tests on Emulsified Asphalt (31:43)
2.3 Quality Tests on Cutback Asphalt (16:03)
2.4 Quality Tests on Blown/Oxidized Asphalt (15:38)
2.5 Sampling Asphalt Paving Materials (22:05)
3.0 SAMPLING AND QUALITY TEST ON BITUMINOUS MIXES
3.1 Quality Tests on Bituminous Mixes (53:09)
3.2 Sampling of Bituminous Mixes (16:53)
4.0 ASPHALT MIX DESIGN
4.1 Fundamentals of Asphalt Job Mix Design (34:18)
4.2 Marshall Mix Design Method (38:28)
4.3 Job Mix Formula (11:19)
5.3 Common Defect - DISINTERGRATION (5:16)
5.0 COMMON DEFECTS IN ASPHALT CONSTRUCTION
5.1 Common Defect - CRACKING (24:47)
5.2 Common Defect - DISTORTION (11:28)
5.4 Common Defect - SKID HAZARD & SPECIAL TREATMENT (10:02)
6.0 QUALITY CONTROL MEASURES IN ASPHALT CONSTRUCTION
6.1 QC in Asphalt Production Control (64:13)
6.2 QC in Asphalt Construction and Drainage Control - Project Inspection (44:38)
7.0 NEW TECHNOLOGIES IN ASPHALT
7.1 Superpave (23:36)
8.0 Final Examination and the Review of the Course
8.1 Final Examination
8.2 Important Notes of the Course
8.3 Review of the Course
5.3 Common Defect - DISINTERGRATION
Lesson content locked
If you're already enrolled,
you'll need to login
.
Enroll in Course to Unlock